Spring 2008
OEET 120 Motors
Spring 2008
|
Announcements |
| Syllabus |
Recently
added text is shown in a larger
font. |
Homework
& Class Exercises
| Assignment No. |
Description | Max. Pts. |
Date Assigned |
Date Due |
Pages, etc. |
| HA22-01 |
Learn the rules for DC motors with armature and field windings connected to separate DC supplies | -- | 1-22 | 1-29 | Click here to get the rules |
| HB11-13 | Reading | -- | 2-11 | 2-20 | p. 125 DC Generators through p. 138 The due date means that I could quiz you on this material any time on this date or afterwards. |
| HB20-12 | Reading | -- | 2-20 | 2-27 | Read about solenoids, pp. 113 to 125. Most important sections: Solenoids, Solenoid Characteristics, Troubleshooting Solenoids |
| HB21-12 | Questions about Rockis pp. 125 - 138 | 15 | 2-21 | 2-28 | Questions |
| HB25-12 | Reading | -- | 2-25 | 2-27 | Read p. 141 - 146 |
| Assignment No. |
Assignment Name | Max. Pts. |
Date Assigned |
Date Due |
Type | Description |
| HA09-16 | Two start buttons and two stop buttons | 1-9 | Handout sheet | |||
| HA10-18 | Relay exercise | 1-10 | CE | Handout sheet | ||
| HA15-18 | Schematic redrawing | 1-15 | CE | Handout sheet | ||
| GA19-16 | DC generator running a motor | 15 | 1-22 | 1-24 | RC | Directions |
| HA24-11 | Contactor and light bulb | 40 | 1-24 | 1-31 | MS & RC | Directions |
| HA29-13 | 1-29 | CE | Handout sheet | |||
| HB05-10 | DC motor | 2-5 | CE | Handout sheet | ||
| HB05-11 | Switches | 2-5 | CE | Handout sheet | ||
| HB05-13 | Contactor and DC motor | 2-5 | MS | Handout sheet | ||
| HB06-13 | Start and stop buttons | 2-6 | MS & RC | Handout sheet | ||
| HB06-14 | Shunt and series DC generators | 2-6 | RC | Handout sheet | ||
| HB07-13 | Compound-wound generator | 2-7 | RC | Handout sheet | ||
| HB11-14 | Motor and two limit switches | 15 | 2-12 | MS | Directions | |
| HB14-11 | Burglar alarms | 30 | 2-14 | 2-21 | MS & RC | Directions |
| HB26-12 | Ground loop | 10 | 2-26 | 2-28 | MS | Click here to get the Multisim circuit. Connect the grounds on the lower circuit so that there won't be a ground loop. |
| HB27-12 | Torque and speed characteristics of three motors | 30 | 2-27 | 3-5 | RC | Directions |
| HB27-13 | Using small 12 V. relays, make a circuit that has start, stop, and reverse buttons. Have it control one of the small (1 inch diameter) motors. | 20 | 2-27 | 3-5 | MS, RC | Have a look at the bottom of page 270 in the book. Omit the Overtravel limit switches and the "All OLs" contacts. |
| GD11-17A | Investigating noise-control measures for the GD11-17 digital motor-controller | 15 | 3-5 | RC | Handout sheet | |
| GB28-17 | Three-phase motor | 15 | 3-10 | 3-17 | RC | Handout sheet |
| GC02-10A | Three-phase motor reversing circuit | 20 | 3-10 | 3-18 | MS | Directions |
| GC02-11A | Three-phase motor reversing circuit | 3-12 | CE | Handout sheet | ||
| GC02-11 | Three-phase motor reversing circuit with real components | 30 | 3-10 | 3-19 | RC | Handout sheet |
| HC19-12 | Two limit switches, ver. 2 | 15 | 3-19 | MS, RC | Directions |
|
| HC31-12 | Differential amplifier | 10 | 3-31 | 4-7 | MS | Handout sheet |
| HD04-01 | Thermocouple | 20 | 4-1 | 4-8 | RC | Directions |
| HD02-13 | Cam circuit | 30 | 4-2 | MS | Handout sheet | |
| HD08-11 | Analog Multiplexer | 15 | 4-9 | 4-16 | RC | Handout sheet |
| HB08-09 | Pellet stove | 20 | 4-9 | 4-16 | MS | Handout sheet |
| HD10-12 | Solid-state relay | 40 | 4-10 | 4-17 | RC | Handout sheet |
| HD15-11 | Vending Machine 1 | 20 | 4-15 | 4-22 | MS | Directions |
| HD16-11 | Vending Machine 2 | 20 | 4-17 | 4-24 | MS | Directions |
| HD21-12 | Vending Machine 3 | 20 | 4-21 | 4-28 | MS | Directions |
| HD21-11 | Stepper motor control IC | 4-21 | 4-28 | MS | Handout sheet | |
| HD22-12A | Two N.O. buttons and a light | 10 | 4-22 | 4-29 | MS | Directions |
| HD22-12B | Two N.O. buttons and a motor | 15 | 4-22 | 4-29 | RC | Directions |
| HD22-12C | Spinning disk, and Hall-effect sensors instead of N.O. buttons | 20 | 4-22 | 4-30 | RC | Handout sheet |
| HD29-10 | Relay Troubleshooting | 20 | 4-29 | 5-2 | MS | Directions |
Extra Credit
| Assignment No. |
Assignment Name | Max. Pts. |
Date Assigned |
Date Due |
Description |
| GD11-17A | Investigating noise-control measures | 15 | 3-6 | Directions | |
| HC13-14 | Stepper motor, part 1 | 15 | 3-13 | Handout |
Reference